HDMI + USB KVM Switcher allows you to control up to 2 HDMI
enabled host devices(like computers, PS4, PS3, Xbox One, TV Box) using only 1
set of keyboard, mouse and monitor, which is ideal for saving space, costs and
increasing PC management efficiency. Moreover, you can share a printer,
scanner, U disk, flash drive with 2 PCs through its USB 2.0 hub. It is perfect
for SOHO, game gaming, multimedia production workstations and monitoring room.
2-Port HDMI Switch 4K
The HDMI KVM Switch Box is
compatible with HDMI 1.4 and HDCP 1.4 and supports resolution up to 4K@30HZ.
Also backwards1080P, 1080i, 720P, 480P, 480i. With advanced ITE66332 HDMI
chipset, this switcher support 4K signal up to 5 metres. Transfer video signal
and audio signal simultaneously. And support DTS, AC3, DSD 5.1/7.1 etc audio
formats. With this HDMI switch, you can enjoy the most luxurious video and
How to Switch Between Two
HDMI Input Devices
Press the Switch Button on
the KVM box.
Use Keyboard Hotkey–Double
click Ctrl Button(or Scroll Button), then click “1” on Numeric Keypad
to switch to PC1 or click “2” to PC2.
Auto Scan Switch–Double
click Ctrl Button(or Scroll Button), then click “S” to start the Auto
Scan Switch Mode. Available to press any button to end it. Besides, you can set
up auto-switch timers between 10s and 999s, which is great for
How to Use the HDMI USB KVM
Connect HDMI IN1 and USB
IN1 to PC1 at the same time;
Connect HDMI IN2 and USB
IN2 to PC2 at the same time;
Connect HDMI Ouput to HDMI
Connect USB keyboard and
mouse to USB 1.1 A ports;
Connect printer, U disk or
other USB devices to USB 2.0 A ports for faster data exchange;
Press the manual switch
button to switch between the two computers.
Please make sure the HDMI
Input Connector 1 and USB B Connector 1 are plugged in the same Host. HDMI IN1
and USB IN1 is corresponding. Do NOT support HDMI IN1 and USB IN2 mixed
Only support resolution up
to 4K@30Hz, not support 4K@60Hz. Please adjust the resolution to a compatible
Must use USB cables to
connect the HDMI input devices with the USB IN ports of KVM Switch. Otherwise,
the switcher may not work normally.
To use Keyboard Hotkey
Switching, the keyboard must be connected to the USB 1.1 Type A ports.
Please connect the printer
to the USB 2.0 Type A ports. And please install the printer’s driver on your
computers before using.
To protect the USB KVM
Switch against over-current, over-current protection is designed. The max
current is 1A. So it is not suggested to use external hard drives with this
1 x UGREEN HDMI USB KVM
2 x USB 2.0 Type B Cables